Coated surfaces ensure an excellent protection against corrosion and an individual decorative look.
Before colour coating, perforated products must be treated appropriately to ensure the proper protection against corrosion. RMIG can arrange such processes as passivating or hot dip galvanising.
The advantages of powder coating are:
- A thick layer can be applied in one process (50-300 micron).
- The finished result guarantees uniform surfaces.
- Powder coating is less affected by mechanical wear and therefore easy to clean.
- Long outdoor life with the right preliminary treatment.
- Wide choice of colours.
- Materials with holes down to and including 1.0 mm diameter can be powder coated. (If the holes are smaller than 1.0 mm further investigation is required)
- A more cost effective process than wet coating.
The advantages of wet coating are:
- A very elegant appearance / finish can be achieved.
- Wet coating is very suited for materials to appear multi-coloured.
- Very long outdoor life if the correct layer thickness is chosen.
- Wide choice of colours.
- Materials with holes down to and including 1.0 mm diameter can be wet coated. (If the holes are smaller than 1.0 mm further investigation is required)
